Home
Videos uploaded by user “HERESJAKEN”
Configure MDT 2013, Windows 10 ADK and WDS for Windows 10 Deployment with PXE Boot
 
10:23
Simplifying the the way you deploy windows can save a lot of time for an IT Professional. Using MDT to deploy windows 10 means that you can update drivers when you need to without having to build a whole new Windows 10 image. To use MDT to deploy Windows 10 you will need to download and install the Windows 10 ADK and install MDT 2013 Update 2 and configure it to work. This video shows you how to install and configure both the Microsoft Deployment Toolkit and the Windows 10 ADK then add the MDT boot image to WDS so you can install Windows 10 straight over the network.
Views: 20369 HERESJAKEN
How to disjoin Azure Active Directory from windows 10 computer
 
03:08
This video shows you how to remove your Windows 10 computer from Azure Active Directory. You may want to do this if your computer was used as a BYOD computer for your work and connected to your work Office 365 account.
Views: 28402 HERESJAKEN
What Graphics Card Do You Have Windows 8
 
02:09
http://heresjaken.com This video shows you how to find out what model graphics card you have in windows 8.
Views: 117551 HERESJAKEN
How to install AsteriskNOW free IP PBX
 
06:03
AteriskNOW is a pre-built linux distro to run with asterisk installed. AsteriskNOW makes it easy to create custom telephony solutions by automatically installing the "plumbing." It's a complete Linux distribution with Asterisk, the DAHDI driver framework, and, the FreePBX administrative GUI. Much of the complexity of Asterisk and Linux is handled by the installer, the yum package management utility and the administrative GUI. With AsteriskNOW, application developers and integrators can concentrate on building solutions, not maintaining the plumbing. This video is aimed at showing you how to install asteriskNOW. You can download it from the download page on the website: http://www.asterisk.org/
Views: 26154 HERESJAKEN
Windows server 2012: IIS installation and testing
 
04:39
This is how to install IIS on windows server 2012 and how to test to make sure it is running and installed correctly
Views: 52358 HERESJAKEN
Schedule When Updates Happen and Automatically Reboot Using Group Policy
 
06:46
This video will show you how to schedule windows updates using Group Policy. This is very valuable to set up the update group policy on Windows Server because otherwise if it automatically updates then it will just reboot itself in 48 hours and get an error saying "Your PC needs to restart to finish installing important updates. If you’ve already saved anything, you can restart now. Otherwise, you should take a moment to save your work." . See http://heresjaken.com/server-2012-r2-automatic-restarting-in-15-minutes/ for more details regarding that. This will also show you how to manually update your server. This video was made using a testing environment on Hyper-V and Windows Server Essentials 2012.
Views: 10422 HERESJAKEN
how to change password in windows 10
 
01:46
This video shows you how to change your password in Windows 10. This video is made in Windows 10 technical preview
Views: 819431 HERESJAKEN
How to Set DNS Forwarder on Server 2012
 
02:22
The DNS forwarder in Server 2012 forwards DNS querys that are not resolved locally to an external DNS server. This video shows you how to setup the DNS forwarder on Server 2012. This will also work on: *Server 2012 R2 *Server 2012 *Server 2008 R2 *Server 2008 Open DNS Manager. In the console tree, click the applicable DNS server. Then right click the server name and select properties On the Forwarders tab, under DNS domain, click a domain name. Under Selected domain's forwarder IP address list, type the IP address of a forwarder, and then click Add.
Views: 23345 HERESJAKEN
How to enable developer mode windows 10
 
01:14
Windows 10 introduces a new way for developers to develop apps in Windows 10. You now no longer require a Developer License to develop, install or test your Windows apps. You can just enable your Windows 10 device once for these tasks and you are all set to go. In this video I will demonstrate how you can enable the developer mode in Windows 10.
Views: 80184 HERESJAKEN
How to Change Password Policy on Server 2012 Group Policy
 
06:27
This video shows you how to change your password policy using group policy on your active directory domain. The things you can set are: *How many passwords are saved *The password age *Minimum password length *If the password has to meet complexity requirements *If the password are stored using encryption This video uses the default domain policy, if you are doing it in production it is usually better to create a new GPO that is only scoped to the users that you want the group policy applied to. You can also set multiple policies and set the scope to set different password policies to different groups or organisational units. I will be doing a video soon on how to set group policy scopes on different groups.
Views: 9564 HERESJAKEN
How to join Azure AD from a Windows 10 computer
 
03:03
Windows now allows you to join Azure Active Directory, this means that if you have an office 365 account with your school or work you can connect it to the organisation using your office 365 account credentials(which is controlled by Azure AD). Some per-requisites for joining Azure AD from a Windows 10 computer are that you have an Azure AD account, which you get by default with every office 365 account as Azure AD is what Office 365 authenticates against. Also to join your Windows 10 computer to Azure AD you will have to accept the MDM(Mobile Device Management) terms and conditions. Joining Azure AD allows you to have single sign on for office 365 applications meaning that you do not have to log in to check your mail or access sharepoint
Views: 18606 HERESJAKEN
How To Enable PowerShell Scripts
 
03:27
More info at: http://heresjaken.com/running-scripts-disabled-system/ If remote signed certificates are not enabled then you will get the error below: File {filename} cannot be loaded because running scripts is disabled on this system. For more information, see about_Execution_Policies at http://go.microsoft.com/fwlink/?LinkID=135170. + CategoryInfo : SecurityError: (:) [], ParentContainsErrorRecordExcept ion + FullyQualifiedErrorId : UnauthorizedAccess
Views: 25842 HERESJAKEN
How to change windows 8 password
 
01:57
This is how to change your password for windows 8. If your user is like mine and is mapped to a windows live account eg. Hotmail then this will also change your password for that. http://heresjaken.com/password-windows-8/ https://www.facebook.com/heresjakencomputing https://twitter.com/heresjaken
Views: 257936 HERESJAKEN
How To Install Server 2012 R2 on Azure VM - Lesson 3
 
07:29
In continuing with the Azure videos this tutorial shows you how to install Windows Server 2012 R2 Datacenter edition on Microsoft Azure. If you want to give Azure a test run you can sign up for a free trail at https://azure.microsoft.com/en-us/pricing/free-trial/ Azure can be a great place to store your Virtual Machine if you need access across multiple physical locations or if you are going to be hosting a multi tenant app or even just for testing. Because you can spin up a test server in a matter of minutes it is much better than buying physical hardware to test with. Just pay for what you use.
Views: 7218 HERESJAKEN
How to change Windows 10 password
 
02:06
This video shows you how to change your windows 10 password. The easiest way to reset your password is to click control alt delete and click the change password button. This is using the full release of windows 10.
Views: 45446 HERESJAKEN
Cannot Disconnect from Azure AD - No Local Administrator
 
05:29
When dis-joining Azure AD I typed in what should have been the local administrator account and got a message that said: "That account info didn't work. Make sure you're entering info for a local administrator account and try again." To fix this what you need to do is create a local administrator account so you can dis-join Azure AD. This video show you how to do that. You can also see how to join your Windows 10 computer to Azure AD: https://youtu.be/V6GOsLQmTSI Or you may want to see how to diconnect from Azure AD: https://youtu.be/oZ0JU8NXXeQ This post also gives you more information: If you have any questions or topics you want covered let me know in the comment section.
Views: 8243 HERESJAKEN
How to enable remote desktop connections in Windows 10
 
02:38
This video shows you how to enable remote desktop connections to your Windows 10 computer. Remote desktop allows you to remotely connect to a graphical interface on your Windows 10 computer. This will only work on the Pro and Enterprise editions of Windows 10, this feature is not included in the standard version of windows. To activate RDP on Windows 10 you will need to tick the "Allow Remote Assistance connections to this computer" and "Allow remote connections on this computer" inside of the System Properties on your computer. These instructions on enabling remote desktop connections will also work on Windows 7 and Windows 8.1
Views: 129073 HERESJAKEN
Introduction to Microsoft Azure Cloud - Azure Lesson 1
 
14:18
This video is an introduction to Microsoft Azure Cloud platform, this is the first video in the Microsoft Azure series. Microsoft Azure is a services based operating environment or cloud computer platform that lets developers build and host services on infrastructure that is managed by Microsoft. Microsoft Azure supports both Microsoft products and other products that are not made or owned by Microsoft. This will show you how to sign up to a free Azure trial to test out some Azure services and also show you how to navigate the Azure portal and do some basic customisation of the dashboard. Azure is Microsoft's competing product to AWS and basically has all of the same services just with Microsoft's flavour on them. At the end of this video you will be able to navigate though the new Azure Portal and see your services and subscription costs. You will also be able to customise the look of the dashboards on the Azure Portal.
Views: 7365 HERESJAKEN
How to remove viruses with malwarebytes free
 
05:35
Viruses seem to be a very common problem with windows computers. Luckily you can remove viruses easily and free with malwarebytes antimalware scanner. Follow the instructions in this video to find out how to scan and remove your own viruses. This will save you money as you will not need to take your computer into a shop to get them to remove your virus. http://heresjaken.com
Views: 20672 HERESJAKEN
How to Install Updates On Server 2016
 
01:30
Microsoft have remove Windows Update from the Control Panel so now it has to be done through the settings app. When I first when I went to update I couldn't find Windows Update in the control panel then I figured out that it is only available through the Settings App or powershell. Windows updates should generally be scheduled using group policy. However, should you need to apply a Windows update manually, follow the steps below. To install updates in Server 2016: -Open the settings app -Go to updates down the bottom -Click check for updates -Install the updates
Views: 61222 HERESJAKEN
How to Install Kali Linux 2016 on Hyper-V
 
08:49
This video step by step walkthough takes you though the installation process of Kali Linux 2016.1(Formally Backtrack) on Hyper-V in Windows 10. You can install Hyper-V on Windows 10 for free and Kali Linux is also a free open source operating system. Kali Linux is designed for penetration testing and comes prepackaged with heaps of security testing tools. This installation is using Kali 2016.1 which is the first of the rolling releases of the Kali penetration testing OS.
Views: 17149 HERESJAKEN
{Hacking} Kali Linux - Finding vulnerable ports
 
04:04
This tutorial will show you how to find potentially vulnerable ports using Zenmap in Kali Linux. Kali linux is a linux distro released specifically designed for penetration testing. Zenmap is a GUI (Graphical User Interface) for a tool called Nmap, Zenmap makes it alot easier to see and use. Once you have found vulnerable ports you can try different exploits on them, which I will go through in later videos. http://heresjaken.com/ Music by R3oath: http://r3oath.bandcamp.com/
Views: 21055 HERESJAKEN
Upgrade to Windows 8.1 Fails
 
05:49
Full article at http://heresjaken.com/something-happened-and-your-windows-8-1-installation-couldnt-be-completed-during-upgrade-from-windows-8/ You can upgrade to Windows 8.1 from Windows 8 for free through the Windows Store. Sometimes if all of the Windows updates are not installed the upgrade of windows will fail and show a message saying "Something happened and your Windows 8.1 installation couldn't be completed during upgrade from Windows 8". This can be resolved by running the Windows updates.
Views: 25006 HERESJAKEN
Install AD, DNS and DHCP on Server 2012 R2 and Creating A New Domain
 
16:16
What is covered in this video: Installing Active Directory role Installing DHCP role Promoting server to domain controller Installing DHCP Adding in basic DHCP scope This lesson shows you how to create a new domain controller using Windows Server 2012 R2. To create this domain controller we will install Active Directory, DNS and DHCP, this is a common setup in small business networks. This video assumes you already have a server installed, if you dont you can watch this video on installing Windows Server: This video is made in a test lab network on Hyper-V using Windows Server 2012 R2, if you want to see how to make the lab network check out this video: https://youtu.be/2OZHV5-t6QY
Views: 21468 HERESJAKEN
How to disable Client Forwarding Rules To External Domains in Office 365/Exchange
 
08:04
Client forwarding rules is a common method for data breaches in Office 365. What they do is make every email that is received by an Office 365/Exchange mailbox get forwarded to an external party. This setting is available automatically in the Office 365 Enterprise SKUs via Microsoft 365 Security & Compliance Center but you can also set it up manually in EAC (Exchange Admin Center).
Views: 6901 HERESJAKEN
i7 2600 getting over 70 degrees
 
02:01
This is my i7 2600 processor hitting over 70 degrees. It is not overclocked this is just what it does. If you have one and this happens to you then this is normal, I ran an intel diagnostic on it and it said it is fine. If you want to run the intel cpu diagnostic you can get it from here http://www.intel.com/support/processors/sb/CS-031726.htm You can also read this blog post to find out more http://heresjaken.com/i7-2600-running-at-70-degrees/
Views: 1474 HERESJAKEN
Active Directory Tutorial 3 - Adding OU's, Computers, Users and Groups
 
07:17
This will show you how to add OU's(Organisational Units), Computers, Users and groups to your active directory domain. We have done this on server 2012. For more check out http://heresjaken.com
Views: 12913 HERESJAKEN
Reset Windows Password On Secure Boot With Kali Linux
 
15:45
More info at http://heresjaken.com/resetting-windows-password-on-computer-with-secure-boot/ This video shows you how to bypass secure boot and reset your Windows Password. The best thing to use for this is Kali Linux but you can use any linux distro. You may need to do this if you have forgotten your windows password and while it is not technically a windows password recovery method it will bypass the need for a pasword. Don't forget to subscribe to keep up with all the latest videos!!
Views: 25904 HERESJAKEN
How To Build Your Own Computer Lab Using Hyper-V and RRAS
 
18:06
Topics covered in this lesson: -Isolating network -Creating Hyper-V virtual switches -Allocating Virtual switches to VM -Installing RRAS -Configuring NAT -Allocating Virtual Switch to new VM in Hyper-V Isolating a computer lab from your main network is essential if you want to test products especially. This lesson shows you how to build your own test environment using Hyper-V which comes free with Windows 10. You can use this environment to test out operating systems on virtual machines without having to worry about screwing with your live network and still having access to the internet. I recommend using SSD storage for storing virtual machines is it will run a lot quicker and you wont get as frustrated waiting for things to happen on your virtual machines.
Views: 7295 HERESJAKEN
Setup Outbound Spam notifications on Office 365/Exchange
 
04:07
It is good practice to monitor outbound spam, if a computer gets infected with a virus or your exchange passwords are compromised the attacker may be able to use your Exchange/Office 365 mailbox to send out spam. This video shows you how to setup notifications if any outbound spam is blocked, if outbound spam is detected your administrator will get an email informing them of this and be able to take the appropriate actions. To block set the notifications -Go to EAC. -Open Protection -Click outbound spam -Open the default policy (or any other policy) -Select Outbound spam preferences -Tick the Send notification to the following email address or addresses when a sender is blocked for sending outbound spam. -Enter the email you want the notification to go to.
Views: 1544 HERESJAKEN
{Hacking} How to Install Kali Linux
 
10:37
This will show you how to download and install Kali Linux. Kali Linux is a distrobution released by offensive security. This is the child of backtrack which is another popular distro by offensive security. Kali is packed full of penetration testing tools. This is the linux distribution that was built from the ground up with penetration testing in mind. Download at http://kali.org
Views: 23562 HERESJAKEN
Disable Internet Explorer Enhanced Security Configuration Server 2012
 
01:46
http://heresjaken.com/ Internet Explorer Enhanced Security Configuration settings define how users browse the internet and reduce the exposure of your server to potential security risks. This can get quite annoying when you need to download something onto your server, so today I will show you how to disable Internet Explorer's Enhanced Security. Once you have finished what you are doing I recommend activating the Enhanced Security again so that it minimalises the risk for other users when browsing the internet on you server. Like us at http://facebook.com/heresjakencomputing/
Views: 2411 HERESJAKEN
Allow External Communication on Skype for Business
 
02:46
This video shows you how to allow Skype for Business users to both contact people on other Skype for business domains and also allow users to communicate with normal skype users. They can use Skype for both IM and normal voice/video chat. This video is made using a demo tenant on Office 365.
Views: 12397 HERESJAKEN
Configuring Malware and Spam Protection Rules On Office 365
 
09:20
This video takes you though configuration of malware and spam protection rules on office 365
Views: 4047 HERESJAKEN
How to Join a Server 2012 Domain on Windows 10
 
04:39
This video shows you how to join an Active Directory Domain on Windows 10. There are two ways to join a domain in Windows 10, the first is though the system control panel settings and the second is inside of the System - About section inside of the settings app.
Views: 2598 HERESJAKEN
Recovering email passwords from outlook
 
03:05
Sometimes users do not know the passwords to their email accounts. This is easy to do as when using an email applicaiton it usually stores the passwords for you and you do not need to type it in so people just forget them. Luckily there is a way to recover your lost email passwords from outlook using a nifty piece of software called mail pass view. Check out: http://heresjaken.com/ for more Follow us at: http://facebook.com/heresjakencomputing More info: http://heresjaken.com/how-to-recover-your-email-password-for-free/ Recover your email for free password from: Outlook Express Microsoft Outlook 2000 (POP3 and SMTP Accounts only) Microsoft Outlook 2002/2003/2007/2010/2013 (POP3, IMAP, HTTP and SMTP Accounts) Windows Mail Windows Live Mail IncrediMail Eudora Netscape 6.x/7.x (If the password is not encrypted with master password) Mozilla Thunderbird (If the password is not encrypted with master password) Group Mail Free Yahoo! Mail - If the password is saved in Yahoo! Messenger application. Hotmail/MSN mail - If the password is saved in MSN/Windows/Live Messenger application. Gmail - If the password is saved by Gmail Notifier application, Google Desktop, or by Google Talk.
Views: 37354 HERESJAKEN
How to setup Multi Factor Authentication in Office 365 - MFA
 
04:14
Multifactor authentication (MFA) is a security system that requires more than one method of authentication from independent categories of credentials to verify the user’s identity for a login or other transaction. You get a free version of Azure multi-factor authentication as part of your Office 365 for business subscription so why not use it. The way it works is once it is setup you will receive a text message when logging into Office 365 with a code that you need to type in. MFA increases security and I recommend using it on at least the administrative users if not all users in your office 365 tenant.
Views: 9206 HERESJAKEN
How To Get Root Access On Galaxy S3
 
03:10
http://heresjaken.com/ Gaining root access to your android device can give you multiple benifits including installing custom ROMs and running apps that require root access. Follow this simple lesson to gain root access on your android and root your android phone for free. CF Root Download: http://download.chainfire.eu/194/CF-Root/SGS3/CF-Root-SGS3-v6.3.zip?retrieve_file=1 Odin Download: http://dl.xda-developers.com/attachdl/45583377d56110b581f0acf3509d3c91/5208d4df/1/1/1/0/4/7/1/Odin3-v1.85.zip Root Checker App: https://play.google.com/store/apps/details?id=com.joeykrim.rootcheck&hl=en
Views: 62986 HERESJAKEN
Active Directory Tutorial 2 - Make user, Join PC to domain
 
10:56
next video: http://youtu.be/Ju9pNrsn52E This lesson will show you how to make a new user on server 2012 and how to join a windows 8 computer to the domain. To join to a domain you must have at least windows 8 professional(more on windows editions at http://heresjaken.com/windows-8-versions/ ). First lesson at http://youtu.be/UJCRl-6mIzA And dont forget to visit http://heresjaken.com/ for more tips and lessons
Views: 7136 HERESJAKEN
Netcomm Wireless NP730 Unboxing and Walkthrough Review
 
09:13
Check out: http://heresjaken.com for more! Or follow at: http://facebook.com/heresjakencomputing The Netcomm Wireless Access Point is designed to be put outside in the weather which is really useful as your every day access point will basically die when wet. You can download utility from the product page http://www.netcommwireless.com/product/wifi/np730
Views: 778 HERESJAKEN
How to reset forgotten domain admin password on domain controller
 
04:27
Boot to a windows server 2012 r2 CD and hold shift F12 then run the bottom two commands MOVE C:\Windows\System32\Utilman.exe C:\Windows\System32\Utilman.exe.bak COPY C:\Windows\System32\cmd.exe C:\Windows\System32\Utilman.exe
Views: 2026 HERESJAKEN
How to install and Deploy Windows 10 Image with WDS
 
14:19
There is a better way to deploy Windows 10 images than using a DVD. This video shows you how to install and configure Windows Deployment Services to deploy Windows 10 images using WDS instead of the old fasioned way. Covered in this video How to install WDS Role on Server 2012 r2 How to configure WDS How to add the boot and install images to WDS Deploying the image to a computer
Views: 65999 HERESJAKEN
How to install Server Essentials Experience - Server 2016
 
05:51
You can actually install the Server Essentials Experience role on Windows Server Standard or Datacenter. This will give you the "experience" (basically the features and tools) like you are using a a Server Essentials server but you can run it under your Standard or Datacenter license. To do this: -Log on to your server as a local administrator. -Open Server Manager, and then click Add Roles and Features. -In Select server roles, select the Windows Server Essentials Experience role. In the dialog box, click Add Features, and then click Next. -In Features, click Next. -Review the Windows Server Essentials Experience role description, and then click Next. -In the pages that follow, click Next, and then on the confirmation page, click Install. -After the installation is complete, Windows Server Essentials Experience should be listed as a server role in Server Manager. -In the flag notification area in Server Manager, click the flag, and then click Configure Windows Server Essentials.
Views: 5761 HERESJAKEN
How to work out Azure pricing - Azure Lesson 2
 
07:54
http://heresjaken.com/how-to-work-out-azure-pricing/ This video shows you how to work out how much Microsoft Azure will cost you or your business to run. This does not cover the cost of implementation or the amount of time that it will take to deploy a solution using the Azure platform. Azure also offers a pricing calculator but that is not exact and does not take all factors into consideration.
Views: 3587 HERESJAKEN
Active Directory Tutorial 4 - Managing Multiple Users
 
09:44
Next video in the series is: http://youtu.be/Ju9pNrsn52E In this Windows server 2012 Active Directory tutorial we will show you how to manage multiple users at once in the active directory service. We will also show you how to control when users can log on and what devices they are permitted to log onto. don't forget to subscribe to see more in this series of video tutorials.
Views: 3868 HERESJAKEN
How To Boot to Safe Mode in Windows 8
 
03:31
This will show you how to boot to safe mode in windows 8. It has changed since windows 7 where you could just hit the F8 key, now you need to hold down shift and repeatedly press the F8 key to get into safe mode. Sometimes it can take a couple of goes to boot Windows 8 to safe mode
Views: 37903 HERESJAKEN
How to install telnet on Windows 10
 
02:40
Installing Telnet on windows 10 is quite easy. You go to Programs and Features, select Turn Windows Features off or on. Then in this window tick the little box that says telnet. Once it is installed you will be able to use the telnet commands inside of the command prompt
Views: 1566 HERESJAKEN
Azure Files Walk through - Live Stream
 
11:17
Livestream of Setting up Azure Files. Azure files allows you to setup an SMB 3 file share in the cloud. You can map a network drive directly from this file share to connect your computer or server directly to your Azure storage. I show you in this video how to create a storage account and setup Azure Files, I also show you how to map a network drive to Azure files and how to download and use the Microsoft Azure File Explorer to connect to your Azure Storage account. Just FYI I have deleted this Azure File share so you can't connect to it. If you have any questions on Azure or any suggestions for future videos let me know in the comments. Azure files is a really good way to move data, I have been using it when I need to move data from one physical location to another, I just map a network drive to Azure Files on both servers and then copy the data across. It is heaps easier then setting up a VPN and also doesn't require you to install anything on your server. Once the data is moved, just unmap the drive and everything is done. Also a quick note on the Azure File Explorer, you cannot look at local resources using the tool. Thats the fun of live streaming, you get to say things and then go "hmmm, is that even right...."
Views: 338 HERESJAKEN
How To Install IIS on Server 2012 r2
 
04:33
This video shows you how to install IIS on Windows Server 2012 r2. IIS(Internet Information System) is the Microsoft Web Server that allows you to host websites or web based platforms on a Windows Server. The server I am using is hosted on Microsoft Azure as a Virtual Machine. The installation process is the same on a physical or self hosted Virtual Machine.
Views: 8194 HERESJAKEN